’70 Challenger Brake Lights
Tech Question
Paul Papa, Mason, OH, 1970 Dodge Challenger 318
I have no brake lights. Fuse, and bulbs are all good andhave check switch at pedal and it is good as well.
Any suggestions?
Paul-
Yes. Think about the way the…
’71 Duster Large Bolt Pattern
Tech Question
mark ciesla, buffalo, NY, 1971 Plymouth Duster 340
I recently purchased a 1971 Duster 340 for restoration.
I want to get away from the small bolt pattern wheels. If I change thefront drums to discs from one of the conversion…
A-Body Rears
Tech Question
Mike Skinner, Bentley, AB, Canada, 1972 Dodge Demon 340
Hi, I am looking at purchasing an unknown year ('73 or '74,I haven't seen the car yet) 4 speed Dart. The owner tells me there is a9.25" diff with 4.88 gears on…
’69 440 Intake
Tech Question
Jim Johnson, Lawton OK, 1969 Dodge Charger 440
Rick, I just traded for a 440 for my '69 Charger and itcame with a cast iron factory dual four barrel manifold (inline carbs)casting number 2264877, along with 2 - 500…
’68 Dart Charging
Tech Question
joe hobbs, beavercreek, OH, 1968 dodge dart gts 383
i have an electrical problem my car has a new electronicsystem and was working fine then it started to act up for some reason thebattery wont stay charged it will start and…
360 Oil, Timing, Sparkplugs
Tech Question
Art Pesaturo, Wellington, FL, 1970 Plymouth Duster 360
I have a 1970 Plymouth Duster with the following: Theengine is a 360 with a Mopar Purple Shaft 292 duration, 0.508" lift cam,ported and polished heads, .30" over 10.5:1…
360 Converter Balance
Tech Question
jeremiah smith, yuma, AZ, 1971 dodge dart 360
hey, I just stumbled across this site in hopes to findingan answer to a problem I haven't been able to find. I've just read through afew of the other questions here on…
’69 Fury III T-Bar Adjust
Tech Question
Bill Clark, Hamilton, OH, 1969 Plymouth Fury III 383
Rick; New with Mopar; How complicated is lowering this bigguy with the Torsion Bar adjustment..with which I am not familiar? Thanks,Bill Clark (ex Chevy person)…
8-3/4 Rear High Speed Hum
Tech Question
neil schroll, Mount Joy, PA, 1969 Dodge Charger 440
I have a high pitched hummm/whirr eminating from my 8&3/4, 742 casedifferential at about 100 mph +. When you drop back below this speed, itgoes away. How do I…
Truck Parts Stolen
Tech Question
parker hayes, Russiaville, IN, 1990 dakota 440
Mr Ehrenberg, I have been in the process of building this truck for some time, just about to finish. I was waiting for the engine to be built when I received a call that…