’64 413 Imperial Engine Build
Tech Question
Allen Taylor, Hobart, IN, 1967 plymouth fury III 413
I just rebuilt a 413 from a 64 Imperial and I've got it inmy 67 Fury that's my daily driver to high school. Its just 0.030 overbored,0.010 under on the crank, 284/…
14″ Rims With Discs
Tech Question
robert riccitelli, wyoming, RI, 1967, plymouth barracuda 340
I bought the MP disc brakes system, had to buy 15 rims. Iwant to get back to 14 rims due to front tire rub. Can I change something orbuy something to make this…
318/904 Swap To 440/727 In 4X4
Tech Question
Paul Forney, Oglala SD, 1980 Dodge Ram Charger 318
I have a 1980 4X4 RamCharger with a 318. I just bought a 440 for it, but it is wrapped in a 1976 Newport. The tranny is good, but it is the long shaft and will not…
Carb Sizing
Tech Question
neil schroll, Mount Joy, PA, 1969 Dodge Charger 446
How do you know when to move up to the next larger cfm carburetor???
I am currently running a 750 cfm edelbrock, that is 12% richer than thestock edelbrock setting.…
Converter Balance
Tech Question
alex aponte, gautier, MS, 1973 Dodge charger 383
My Charger is getting a freshly rebuilt 1971 383 (bored0.060 over). I removed the engine and did not mark the bolts on theflexplate in relation to the torque converter.…
440 Distributor Curve
Tech Question
Fred Joslin, Spokane, WA, 1969 Imperial LeBaron 440
I have the original ignition in this 5000 lb. beast andwant to upgrade to electronic.
I believe that the distributor is good so am I better off getting aPetronix…
’72 Scamp Control Arms
Tech Question
Brian Soash, Monrovia, CA, 1972 Plymouth Scamp 360
I am currently upgrading the braking and suspension systemon my A-body to disc brakes and firmer handling. My question is with regardto upper and lower control arms from…
Heater Box Swap ’73 Swinger
Tech Question
Craig Robertson, Utica, MI, 1975 Dodge Dart Swinger 318 V-8
I am replacing a heater box and controls in my 1975 DodgeDart. The only thing that I can find that is in good shape and not missingpieces is a complete unit…
Ballast Resistor ’73 Challenger 440
Tech Question
Steve Whelan, High Wycombe, Australia, 1973 Dodge Challenger 440
HI Rick,
you must be sick of ECU/Ignition conversionquestions so I found out most of the info I was looking for from yourprevious tech Q's as well as links from…
Rotor Warpage 2000 Dakota
Tech Question
Mike Vincent, Ajax, ON, Canada, 2000 Dodge Dakota 4.7L
I have a brake question regarding my nephew's 2000 Dakota.The truck is pretty stock, with a new cat back exhaust and the K&N intake kit, he has gone to 20" wheels but…