Valves For ’71 J-Heads
Tech Question
Russ Syens, Fox Lake WI , 1971 dodge dakota 360
I wanna put a bigger intake valves on my 1971 "J" heads. Gofrom 1.88 to 2.02. do i need to put in new valve seats or have it ground out to 2.02. thanks
You can…
Dart Front End Shake
Tech Question
Big Al Marciano, Torrington, CT , 1973 Dodge Dart Swinger 318
My front end shakes when I apply the brakes on my Dart. Allrotors etc have only about 1500 miles on them. This just starred this year.Do you have any…
’71 Challenger 440 Or 426 Swap
Tech Question
Dave Jenkins, Aiea; HI, 1971 Dodge Challenger
Hello! My Dad finally gave me his 1971 Challenger, that I've been asking for since before I could even drive. I even marked it when I was about 10 years old (5 or 6…
’94 Dakota PCM And O/D
Tech Question
Russ, Fox Lake, WI 1994 Dodge Dakota 4x4 3.9 v6
I plan on dumping a 360(carbureted) in my 94 dakota thissummer. I wanna know if the overdrive off button will still work if I takeout the PCM?Is there any other problems…
’67 Dart 440 Swap K-Frame
Tech Question
odise carr, westampton NJ , 67 dodge dart conv. 360
I purchased my Dart about two years ago with a 360. I'mattemping two replace the 360 with a 440. Do I have to change the k-frame.
Odise-
To do it the OEM…
’68 ‘Cuda Header Leak
Tech Question
scott goplen, richland center, WI, 68 ply cuda 340
I put a set of headers on my 'Cuda and they leak and leak.I exchanged the summit ones for Hedman, I bought 3 diff sets of gaskets,they leak between the head and…
Shaker Hood On 340 Indy Intake
Tech Question
Kevin Will, Houston, TX, 1971 Dodge Challenger, 340
I would like to put a Shaker hood on my 340 poweredChallenger. Would the new Shaker bubble and hood fit properly if I installedthe new 340 Indy intake? Also I would…
’65 Dart Hemi Swap
Tech Question
Mike Bowman, Cleveland, OH, 1965, Dodge, Dart, 170
On a 1965 Dart 170, is it possible to swap in a 426 Crate Hemi without toomuch headache? My biggest concern is fitting the elephant into that littlespace. There is no…
8-3/4″ Rear Inner Axle Seals
Tech Question
Kenny East, Rixeyville, VA, 73 Plymouth Cuda 416
I pulled the 8.75" center section out to have new gearsinstalled and want to know if I have to replace inner axle seals beforere-installing axles? (The current seals…
318 Hop-Up
Tech Question
Al Fox, Hartford WI
I own a 4 wheel drive Dakota.The truck runs fine, but the318 is really slow! I would like about 275 horses and a bunch moretorque.What sort of problems would installing a Ram 360 bring? Would…