Tech Questions E-mail Guidelines – Mopar Action On-line
You must provide an e-mail address so that the I can respond to you.
Make sure that the e-mail address is not blocked or protected. An e-mail address that is blocked or protected can prevent the delivery of the confirmation message.
Your…
360- 4-Bbl for 318
Tech Question
Jeff Schliep, Duluth MN , 1967 Plymouth Fury 318 2 barrel
I have a 1967 Plymouth Fury with a 318 2 Barrel that I am using for EnduroRacing. I am looking to get a little more out of her and have been toldthat by adding…
Adjust Solid Lifters
Tech Question
Kenneth East, Rixeyville, VA, 73 Plymouth Cuda, 340
After adjusting the solid lifters ( I have Crane Goldroller rockers) I find #7 exhaust and #2 intake adjusting screws flush withthe locknuts. All other adj screws…
’74 Road Runner Handling
Tech Question
Travis Vela, Stafford, TX, 1974 Plymouth Roadrunner 318
Hey Rick, how's it hangin'? I know I don't have the mostpopular and lightest B-body in the world, but I'm having trouble findingcurb weight info on my 74…
’59 DeSoto Engine Oil
Tech Question
raymond ward, washington, PA, 1959 desoto firesweep sportsman 361
hi rick. i have recently purchased a 1959 desoto 2 dr with a361 2-bbl in pretty nice shape. runs and drives great. my question is shouldi use detergent…
’74 Charger Tie Rods
Tech Question
rick alison, Invermere, BC, 1974, dodge charger se, 440
Hi, I'm rebuilding the suspension in my '74 Charger withyour brake upgrade. While i'm at it I would like to install 11/16" tie rods.Could I order the parts I…
360 Swap In ’87 5th Ave.
Tech Question
Gid day from Canada Rick.
I'm swapping in a freshened up 360 from a 1978 Cordoba into my '87 Fifth Avenue. It was low milage and running well, so I just gave it a re-ring kit from one of your advertisers and a locally…
318 Vapor Lock
Tech Question
Dennis Bartnik, Red Lion PA, 1985 Dodge D150 1/2 ton 318
I have a stock 318, 2bbl carb, Holley electric fuel pump,with regulator valve set anywhere from 2 to 5 1/2 PSI and still it "vaporlocks" constantly. Why?…
426 Hemi Balance
Tech Question
ed clemens
Rick, I know you are busy, so I'll try and be quick. I'm building a 426 Hemi: New MP block; steel 440 crank; Manley sportsman rods; MP 10:25 to 1 pistons; factory steel "thin" harmonic balancer off steel…
Dorman Brake Hoses
Tech Question
Bill Jerold, lynbrook, NY, 1972 Plym Duster 360
Rick, I replaced the front calipers on my Duster (standard'73-up single piston sliders). I got China made front flex hoses from PartsAuthority D.B.A. Advance auto parts.…