9-1/4″ Rear For F-Body
Tech Question
jean, boras, 1977, plymouth, volare, 400
what is the axle track for the 9 1/4" rear end from a B-van? Will it fit my F-body as is? This is the only plentiful rear end with an acceptable price.
Jean,
the…
727 Won’t Upshift
Tech Question
Dan Michalek, White Pigeon, MI 1989 Dodge Caravan 360
Dr. E-berg, I have a TorqueFlite question for ya, I have anA-727 out of a '78 Lil Red Express in my Caravan(!) It has the MP shift kit,plus the 5.0 lever, a…
4-Link Swap
Tech Question
john shoe, Murrieta, CA, 1975 dodge dart sport 360
Rick- I've not so much of a question , as much as rhetoric;an inquiry about Chrysler's excellent (in my opinion ) rear suspension /drivetrain from the golden years…
’77 New Yorker Part-Out
Tech Question
jeff robenolt, montello, WI, 1977 chry new yorker 400
I have the chance to get a 77 New Yorker for $50. Is the motor worth holding on to?
The tag reads fb 400 4.ce. The trans looks like a 727 but is it a big block?…
Pushbuttons For 727
Tech Question
Craig Casper, Norfolk, VA, 1959 Plymouth Sport Fury 440
I have instaled a 440 Six-Pack with a 727 transmission and8-3/4" rear end. I'm trying to use the original push button shifter butcannot get the park to work. Is…
Rear for ’87 360 Dakota
Tech Question
ike haney, cookeville TN, 1987 Dodge Dakota 360
Hi, I have a little project in my shop right now- an '87Dakota, frame off, '77 360, 10:1 flat tops, '70 340 J heads ported andpolished, Edelbrock Streetmaster intake,…
’71 Non-Rally Challenger Fuel Gauge
Tech Question
Rey Garza, Lancaster, CA, 1971 Dodge Challenger 383
My 71 Challenger with a non-rally fuel gauge is not working.I recently purchased the car and was told that the gauge was bad and thesending unit checked good. So I…
440 ID
Tech Question
Howard Willey, Newcastle, CA, 1965 Plymouth Sport Fury 383
Richard, I just bought a standard bore 440 engine that has aMaltese Cross on it. The numbers 10 & 1 are also stamped on it. I would liketo build this…
Carb For 318
Tech Question
Daniil, Moscow, 74, Plymouth, Scamp, 318
HI! Which of listed below carbs is more suitable for my car:
Holley 650CFM, Rochester - M4M, Carter AFB, Carter (2-bbl,from Ram Van), or would you like to suggest me some other…
Measure Driveshaft
Tech Question
john johnston, murchison, TX, 1971 Plymouth valiant 360
Oh great one, I have 1971 Valiant 4 door sedan and I pulledthe 318 and swapped in a 360. After dropping in the 360 I realized I neededto swap the tranny 904 for…