Grind Down a 360 Crank?
Tech Question
jason zalewski, prince albert, SK, canada, 1978 dodge monaco 360
I was wondering if it is possible to offset grind a 360 crankdown to a 2 inch rod journal. If so can it be done on a cast crank as wellas a forged? My…
‘Cuda Handling
Tech Question
Magnus Wallner, Stockholm, Sweden, 1972 Plymouth Cuda 340
I'm restoring and hopefully improving my 340 6pak 'Cuda, and since it's only gonna be a road car, I wanna improve handling as much as I can (afford). I have acquired…
’72 ‘Cuda Body Panels
Tech Question
Magnus Wallner, Stockholm, Sweden, 1972 Plymouth cuda 340
First of all, thank you for all your help so far. I wouldnever have gotten this far without you and MA.
This is more of a resto-question than a tech-question…
Manual Trans For Stroker ’68 Coronet
Tech Question
Steven Duke, Elmira, NY, 68 Dodge Coronet 512
I want to thank you for all the help you have given me in the past haveone more question for ya--I have a 68 coronet with a 512 stroker & built 727trans, 3:73 Dana…
Body Panel Interchange: 2/4 Dr. Valiants
Tech Question
John Self, Mount Vernon, MO, 1975, Plymouth, Valiant 318
Dear Rick,
this is more Resto, than tech, so here goes. Is there any guide or manual I can buy that will tell me what body panels will interchange between 2 and…
Exhaust Restriction On Built 273
Tech Question
Jim Johnson, Lawton, OK, 1965 Dodge Dart 273
Rick, once more I need your sage wisdom on a problem. I have a '65 two door Dart, 273, 904 column shift automatic that I have been building up to mimic your Green Brick…
360 Head Gaskets
Tech Question
steve collins, Hauppauge, NY, 1980 dodge D300 p/u 360
I had bought this dodge D300 Dully with the original 360 and 42000 miles in 2003. It now has about 45000 miles. I use it for towing to the local track here on Long…
Ammeter Capacity
Tech Question
Joseph Siefker, milan, MI, 1968 dodge charger 6.1
will the ampmeter in dash take the amps of 90 plus withoutdamage to the gage? I am installing new 6.1 Hemi.thanks Joe..
First, a comment to everybody: Here's…
Edelbrock Heads for 383
Tech Question
Todd Rhynes, San Jose, CA, 1964 Dodge Polara 383
I'm building the 383 in my daily driver for maximum mileage.The car is a '64 Polara 500.
My question is really about heads, but I'm alsoopen to any other input you may…
2.5L Timing
Tech Question
Marcus Canon, Longview, TX, 1991 Dodge Shelby Daytona 2.2
Hi, all knowing Rick. I recently bought a real nice 1991Shelby Daytona turbo I, auto. So far I have installed a K&N airfilter,Gibson muffler, 2.50 inch…