727

Tech Question Bill Reese, Panacea, FL, 1989 Dodge Pick-up Short bed 360 I swapped the orginal 318 to a 360 engine and the orginaltrans is a 904 type. I'm planning on swapping it out for a 727. My questionis related to drive shaft…

Tech Question Jon Finnicum, New Phila, OH, 66 ply belvedere 318 My car is a '66 Belvedere with a 318, poly-wide block, witha 727 transmission. Will a small block bolt up to the transmission like a318. Or a big block like a…

Tech Question BURTON GOFF, ALBRIGHT, WV, 88 DODGE DAKOTA 366 I have a 88 short bed Dakota with a 360, 727, and 4.10 8-3/4. I have hadmultiple trans shops work on the trans and can not raise WOT shift points toabove 4000 RPM. The…

Tech Question rick mullins, blue ridge, VA, 1970 Dodge Dart Swinger 340 ive been reading your columns since I was a kid and I've learned alot from your responses, but now I need advice. The car is a 340, 727, 8-3/4 sure grip 3.23…

Tech Question Chris Jowett, Coquitlam, BC, Canada, 1970 Coronet Superbee 383 Hi I was thinking about replacing the old worn out 383 inmy SuperBee for a Hemi crate motor, probably the 426 crate Hemi from Mopar. The superbee has a 3…

Tech Question John Bosnoian, Madison, MS, 1973 Plymouth Cuda 340 I have a '73 'Cuda 340 with a 727 trans. and 3:55 gearsthat I did verify Before I rebuilt my transmission I was turning 3500RPM at55MPH. I did a full rebuild with new…

Tech Question Dan Michalek, White Pigeon, MI 1989 Dodge Caravan 360 Dr. E-berg, I have a TorqueFlite question for ya, I have anA-727 out of a '78 Lil Red Express in my Caravan(!) It has the MP shift kit,plus the 5.0 lever, a…

Tech Question Craig Casper, Norfolk, VA, 1959 Plymouth Sport Fury 440 I have instaled a 440 Six-Pack with a 727 transmission and8-3/4" rear end. I'm trying to use the original push button shifter butcannot get the park to work. Is…

Tech Question jason guitar, milan, MI, 1970, ply, cuda, 440 I have a 73 cast crank 440 motor in my 70 Barracuda and my 727 trans and/or converter grenaded. I had a another 727 from a 71 New Yorker rebuilt and instaled a new…

Tech Question terry leohr, seville OH, 1970 plymouth duster 383 I am currently installing a 383 in my 70 Duster. Everythingis going fine except I purchased a mild low stall converter from Summitracing and have had two different…