440

Tech Question don Tackett, Virgie, KY, 1972 dodge charger, 400 I have a 400 dodge motor that has every thing it is newcam, lifters, everything. I have a bad miss and popping from the carb. Whatcould be my problem? I'm about ready…

Tech Question Clay Cooke I have an '84 Dodge Ram with a 440. I swapped in the engine over this last summer, and ever since then I have had problems with the charging system. Power is getting lost somewhere, and I dont know where.…

Tech Question Howard Willey, Newcastle, CA, 1965 Plymouth Sport Fury 383 Richard, I just bought a standard bore 440 engine that has aMaltese Cross on it. The numbers 10 & 1 are also stamped on it. I would liketo build this…

Tech Question Dave Gardner, Greencastle, IN, 1967 Dodge Dart GT, 318 Im wanting to put a 383 or 440 in this dart, I have a 904tranny, will these size motors work with this 904 transmission? The smallblocks (LA273-360) and…

Tech Question Bryce Carpenter, Prospect, PA, 1971 Plymouth Fury 440 Hi Rick, I've got a '71 Fury, with a '70 440 Commando,Carter AVS #4741, Edelbrock Performer intake, stock '74 heads, bored .030,flat top Mopar pistons, Mopar…

Tech Question Rick Rickman, Denver CO, 77 dodge van 440 I have a serious oil leak that appears to be from the headgasket right between cylinders 5-7 back left. This seems to be a highpresure leak since it sprays the frame and every…

Tech Question Fred Joslin, Spokane, WA, 1969 Imperial LeBaron 440 I have the original ignition in this 5000 lb. beast andwant to upgrade to electronic. I believe that the distributor is good so am I better off getting aPetronix…

Tech Question Steve Whelan, High Wycombe, Australia, 1973 Dodge Challenger 440 HI Rick, you must be sick of ECU/Ignition conversionquestions so I found out most of the info I was looking for from yourprevious tech Q's as well as links from…

Tech Question Jim Johnson, Lawton OK, 1969 Dodge Charger 440 Rick, I just traded for a 440 for my '69 Charger and itcame with a cast iron factory dual four barrel manifold (inline carbs)casting number 2264877, along with 2 - 500…

Tech Question Dave Robertson , ON , Canada , 1965 Dodge Coronet 440 I have what seems to be incredible lifter noise at idle, almost like a knock. The noise was there previously, now it's back after freshining up the engine. I used…