440

Tech Question josh shakl, Lake Havasu, AZ, 1972 dodge charger 440 Hi rick, im 16 years old and I just bought my first car: a1972 Dodge Charger SE with a 440 in it. I am rebuilding the 440 right nowand my qustion is this: I bought a…

Hookers Glenn Menard, Memphis, TN, 1973 Plymouth 'Cuda 440 I am planning on replacing the exhaust system on my 'Cuda and wanted to get your opinion on a few options. The car has a fairly"warmed over" 440: 0.040 over - Kieth Black…

Tech Question jerre hutcheson, anniston, AL, 72 plymouth satellite plus 440 I recently installed this 440 engine it ran fine. Iinstalled an Edelbrock intake along with the dual quad setup from Summit. Itstill ran great . Next I…

Tech Question Glenn Lackey, Burley, ID, 1971 plymouth Road Runner 440 Rick....I appreciate your rag, great articles. (I'll avoidthe "20 questions", even though I have several); My 440 is bored .060" over,supposedly has a 270H cam,…

Tech Question nawaf balushi, east riffa, kingdum of bahrain, 1974 dodge challenger 440 c.i I Know that you are so busy, so I'll make it fast, I'm driving a 1974' 440dodge challenger. I'm planning to stroke up my engine into a 500…

Tech Question Jerry Anderson, Panama City Beach, FL, 1970 Plymouth Cuda Hello Mr. Ehrenberg, I am building a 70 Hemi Cuda Clone. I am planning to install a Hemi witha 4 speed. I have read about the Stage V conversion heads for 440…

Tech Question Wade Carrier, Rock Island, TN, 1977 Plymouth Volare 440 Ive got a 1977 Plymouth Volare station wagon that Imputting a 440 in. Right now I currently got an 8-1/4" 2.94 Sure Grip rearend out of an 83 Gran Fury police…

Tech Question Matt Kirby, Wacheeta, KS, 1971 Dodge Charger 440 I have a spare 8 3/4" axle, 489 pumpkin to replace myCharger's stock 8.25". I am planning a pretty unusual engine swap withexpected torque at about 700 ft-lb.…

Tech Question Andy Powell, Perryman, MD, USA, 1987 Dodge D150 2wheel drive 318 My truck was built with the 225 slant six. I switched it to the 318 V-8. I am seriously considering putting in a 440 big block. Could you give me some…

Tech Question mike sinclaire, cromwell, CT, 1967 Plymouth Satellite conv. 440 Hi, I put a used 440 in my car and the oil pressure was ok,60 psi under throttle, 30 at idle.My problem now (a year later) is the oilpressure stays at 30…