’90s Magnum Pilot Bearing
Tech Question
Harry Garlinghouse, Oakville, WA, 1965 Dodge station wagon 383
I think I read somewhare that a special pilot bearing couldbe bought to mate up a standard trans to an auto-trans crankshaft. I thinkis was made by NAPA.…
Overbore 340
Tech Question
Scott Marshall, Wills Point, TX, 1971 Dodge Dart Swinger 225
I recently purchased a 340 block and crank, the date codeon the block is 7/10/69. I checked bore of block and it is at 4.080 (.040overbore). Crank is…
5.2/5.9 Ex Manifolds on ’73 318
Tech Question
Donald Hineman, Camp Caldwell, IRAQ, 1973 Plymouth Satellite 318
Stationed In Iraq with U.S. Army. Want to replace existingolder exhaust manifolds with new ones. Will the current generation ofMopar/Chrysler 5.2 - 5.9…
318 Hop Up
Tech Question
colton herzog, PA, 1973 dodge charger 318
I am wondering if you know any way to get a little morehorsepower out of a 318 without spending a lot of money. I don't want toget into changing the crank or cam, or even…
Remove Alternator Pulley
Tech Question
Joe Jura, Downers Grove, IL, 1969 Plymouth Road Runner 496"
Richard, I bought a March serpentine pulley set for my Road Runner. I removed the alternator pulley and took alternator and new pulley to local auto parts…
360 Intake Manifold
Tech Question
mike mccutchan, Rochester, NY, 1976 plymouth duster 360
I'm swapping a very stock (and unsatisfying) 318 out for a 360 that will be a budget build. After hearing many guys trash talk the original style Torker intake,…
Alternator Clearance On Aluminum Heads
Tech Question
Earl Watt, Syracuse, NY, 1972 Plymouth Duster 340
I have installed a set of Edelbrock Aluminum Heads on mystreet/strip '72 Duster 340. All has gone well but the alternator positionis not the same. Since the head seems…
’92 318 Redesign
Tech Question
Paul Johnson, Fincastle, VA, 1991 Dodge D-150 318
what big changes occurred in the model year 1992 for thisPickup truck? All the speed parts and equipment 'cut-off' at 1991 anddifferentiate.
The 318 engine…
’70 440 Carb
Tech Question
Bryce Carpenter, Prospect, PA, 1971 Plymouth Fury 440
Hi Rick, I've got a '71 Fury, with a '70 440 Commando,Carter AVS #4741, Edelbrock Performer intake, stock '74 heads, bored .030,flat top Mopar pistons, Mopar…
Set Pinion Depth
Tech Question
Rojohn Soriano, Puyallup, WA, 1972 Dodge Challenger 318
Hello again. Thanks very much for helping me out with the ignition switchproblem I recently had on my Challenger. As always, you hit the nail on thehead! At any…