318 Lifter Clatter
Tech Question
Joe Krizek, North Pole AK , 75 Dodge Power Wagon 318
I rebuilt my 318 in my four wheel drive truck. The blockwas hot tanked and bored 0.030" over, the crank was ground 0.010" under, andtwo rods were reconditioned. The…
360 Oil Pan On 318?
Tech Question
jacob burnett, spanaway, WA, 1970 dodge dart 360
my car currently has a 318. I have an 80's 360 I amswapping in, but my oil pan on my 318 is different from the 360's rear sumpone. Will the 360 pan clear?
No…
’70 Dart 340 Trans Problem
Tech Question
rick mullins, blue ridge, VA, 1970 Dodge Dart Swinger 340
ive been reading your columns since I was a kid and I've learned alot from your responses, but now I need advice. The car is a 340, 727, 8-3/4 sure grip 3.23…
’71 Challenger Driveshaft Pinion Preload
Tech Question
Ron Gaul, Longmont, CO, 1971 Dodge Challenger 340
I was told when replacing the driveshaft in a 1971Challenger, that I would have to reset the pinon preload. Is this true, andif so, why? Thank you, Ron
Ron,…
Sure-Grip Diff
Tech Question
brian copley, milton, WV, 84 dodge ramcharger 4x4 318
First, your mag is the only Mopar mag out there with goodtech, humor, and great features. Now the question:
Maybe I am ignorant of what's going on here, but on my…
600 CFM Carb For 318
Tech Question
jacob burnett, graham, WA, 1970 dodge dart 318
I have a 1970 Dodge Dart with a 318. It has dual exhaustand headers. I would like to know if my 600 cfm Holley carb would be a goodupgrade over the stock 2 bbl? And do I…
Edelbrock manifold mod
Tech Question
Fred Knudsen, Dayton, NV, 1965 Plymouth Sport Fury 426W
While rebuilding my 426 wedge engine, I decided toinstall an Edelbrock RPM Preformer intake mainifold I found that the airconditioning mounts interfered with…
Bore Limit For ’72 413
Tech Question
Gary Angell, Mason City, IA , 1968 Dodge Dart 446
How much can I bore a 1972 casting 413
It is a HD block with cast-in water pump bosses in the rear of the blockand extra heavy braces on the sides.
Can it be bored out…
727 vs. Hemi 727 Trans
Tech Question
Chris Jowett, Coquitlam, BC, Canada, 1970 Coronet Superbee 383
Hi I was thinking about replacing the old worn out 383 inmy SuperBee for a Hemi crate motor, probably the 426 crate Hemi from Mopar. The superbee has a 3…
Twisted Sister
Tech Question
Paul Wade II, North Charleston, SC, 1984 Dodge D-100 318
I am having a problem with my speedometer cable. I replaced the original cable with a new one and one month later the cable twisted in the cover. I would like…