Oil Filter Gaskets
Tech Question
Sean Bolock, San Marcos, TX, 1971 Dodge Demon 340
For the 90 degree (adjustable) swivel oil filter adapterthat clears the exhaust pipe, what are the thicknesses of the three gasketsthat go there, 1 on between the bolt…
Charger Buy
Tech Question
jeff lauharn, St. Peters, MO , 1971 Plymouth Satellite 383
I have a 71 Satellite, Road Runner clone. After strippingthe body for a restoration I am doing in my garage, I found more rust than Ihad hoped for at the…
Gears In ’78 Magnum XE
Tech Question
earl sexton, owingsville, KY, 78 dodge magnum xe 71 440
I have a 78 Magnum XE that came with a 400" big block. Iput a '71 440 out of an Imperal in it; I bored it 0.030" over. It has OEMCarter AVS carb. It is all Mopar…
318 Cam
Tech Question
Don Blake, kankakee, IL, 80 ply volare 2 dr 318
Hey there, Rick. I am putting a 99, 318 Mag engine and anAX 15, 5 spd trans into my Volare with an 8-1/4, 3.55 S.G. The engine isfresh, std bore, stock except for H 814…
’71 Manifolds For ’75 Smoggers
Tech Question
eric johnson, kenton, DE, 1971 dodge dart 318
I have a 1975 truck motor that I have swapped into my Dart.The '75 motor has smog ports under exhaust ports. Can I use my '71manifolds? I can't seem to find any info…
360 HP Boost
Tech Question
Luke Reese, Lewistown, PA, 1973 Dodge Dart Sport 360
Mr E'berg, I am 16 years old and need your help. I dragrace a 73 Dart Sport and need a little help with beating up all of myfriends with new Mustangs and late 90's…
V8 For Duster
Tech Question
Quint Baxter, Oregon City, OR, 1974 Plymouth Gold Duster 225
I bought this Duster a couple weeks back and I feel itneeds a V8. I think because of how often I want to drive it that a nicereliable crate Magnum 360 with…
’72 Plymouth Mishmosh Combo
Tech Question
jerre hutcheson, anniston, AL, 72 plymouth satellite plus 440
I recently installed this 440 engine it ran fine. Iinstalled an Edelbrock intake along with the dual quad setup from Summit. Itstill ran great . Next I…
440 Intake Manifold
Tech Question
Glenn Lackey, Burley, ID, 1971 plymouth Road Runner 440
Rick....I appreciate your rag, great articles. (I'll avoidthe "20 questions", even though I have several); My 440 is bored .060" over,supposedly has a 270H cam,…
’71 ‘Cuda Body Panels Under High HP
Tech Question
brian thomas, cumby, TX, 1971 plymouth cuda 383
My 1971 'Cuda has had both quarter skins changed and thetrunk and driver's floor pans replaced. I have a fairly powerful 440 (approx450 h.p. and 200 nitrous shot) that I…