Browsing Category
Engine/Performance
Mopar engine and performance questions submitted by our readers and answered by our technical editors.
Smallblock Restorer’s Guide
Factory replacement and performance parts.
By Go Longacre
Six-Pack Sitting Down Under
I have just bought a 1970 R/T 440 six-pack Challenger. It needs a good tune-up, been sitting for awhile 1,000 miles in 10 years, but down here in Oz it’s hard to find out about the six-pack set‑ups and exactly how the system works in!-->…
Car Tunes
I ’m helping my son finish dropping a 440 in his Dart Sport. New everything. All is great, except for little vacuum. We used a MP aluminum manifold—P4529118, and a MP cam P4120235 with 284° duration and 0484Ëť lift. Vacuum at idle is around!-->…
In Lieu Of Lube
Do you pre-oil Moparhydraulic lifters beforeinstallation? I mean, filling thelifter itself with oil? I am sure Iread in the M.P. Engine Manualnot to do that as it could causepiston damage. What’s thescore, E’Berg?Correct. Do not pre‑oil!-->…
On Top Of Ol’ Smokey
1970 Challenger, 440. I am havingproblems with burning oil at startup and ona steeper downhill slope, a cloud of bluesmoke, It goes away when accelerating orjust normal running. What does this soundlike to you?Valve stem seals brittle or!-->…
Fan Plan
I'm wondering if you could providesome guidance? I am installing a 2998328fan shroud in my 1973 Challenger witha 440. I’ve been using the HD clutch fansuccessfully for years but with the shroudinstalled I have about ÂĽ" clearance from!-->…
Shrouded In Mystery
Will a fan shroud from an ’85 Dodgetruck with a slant-6 and a 4-speed fit my’85 truck which came from the factory witha 318 and a 4-speed? My truck has the 22”radiator (2 row?). I found this shroud oneBay but I’m scared to purchase it for!-->…
Diesel Wannabe
Hi Rick, ’74 Challenger. I’m running a440 with 4-Bbl, dual-plane intake, Eddieheads, TTi headers, 3" exhaust, and a0.509” purple-shaft in some really hot summerweather right now. I have replaced my180-degree thermostat with a 190 and!-->…
Hot Stuff
What is the reason for the new 5.7 literHemi R/T engine having 14.5 quartcapacity cooling systems and using a203°F thermostat? The capacity seemstoo small for an advertised 370 HPengine. The 203°F thermostat keeps theengine close to the!-->…
Cracked Up
I disassembled my 318 Magnum andfound this on the rear main , is this a casting flaw or didsomething bad happen? I know it has asmall hole, but I have never seen a rearmain with a hole that big, is it safe toreuse?
Reader Magni found!-->!-->!-->…