Browsing Category
Fuel System
Fuel For ’71 ‘Cuda
Tech Question
Terje Carlin, Uddevalla, Sweden, 1971 Plymouth Cuda 340
Hi!
I have in my garage a '71 Cuda 340 with only 30,000 miles on the meter. It has been stored in a garage since '76 and I am about to make it for use in the…
Carb Sizing
Tech Question
neil schroll, Mount Joy, PA, 1969 Dodge Charger 446
How do you know when to move up to the next larger cfm carburetor???
I am currently running a 750 cfm edelbrock, that is 12% richer than thestock edelbrock setting.…
’69 440 Intake
Tech Question
Jim Johnson, Lawton OK, 1969 Dodge Charger 440
Rick, I just traded for a 440 for my '69 Charger and itcame with a cast iron factory dual four barrel manifold (inline carbs)casting number 2264877, along with 2 - 500…
383 Fuel Problem
Tech Question
Jackson Boyd, Toronto, ON, Canada, 1967 Dodge Charger 383
Hi Richard,
Big Mopar Action fan here in Toronto ( I am notbig, I mean I like it a lot) Cant get enough of your tech, thanks.
I did a 4bbl intake and carb…
318 Carb Swap
Tech Question
elaine cornthwait, ann arbor, MI, 1984 dodge truck 318
Hi Rick,
The original 2bbl carb is shot so I'm replacing it with an Edelbrock 650AVS type w/ electric choke and 360 spreadbore cast iron intake manifold.…
Intake ’74 440
Tech Question
Brian Yee, Coquitlam, BC, canada, 1974 dodge challenger 440
Hi Rick, I am wondering about my intake/carb setup that I amrunning. I have an Edelbrock AVS 800 cfm on a Performer RPM intake, intoiron 452 heads, Hooker…
’69 ‘Cuda Fuel Gauge
Tech Question
Corey Carter, adairsville, GA, 1969 Plymouth Barracuda
Hey Rick, I have a 1969 Plymouth Barracuda Fastback with a340 4-BBL. I'm currently having an issue with my fuel gauge. It currentlyreads empty no matter how much…
Swap Out Thermoquad
Tech Question
Nawaf Al Balushi, east riffa, bahrain, 1974 dodge challenger 440 c.i
Dr. Rick, Help me out please! Im driving my 1974 DodgeChallenger with 1978 440 c.i engine under the hood, the engine has a CarterThermoQuad carb,…
AVS 4-Bbl Tuning
Tech Question
brian yee, coquitlam, BC, Canada, 1974 dodge challenger 440
Hi Rick,
I'm not sure if you could help me on this one buthere it goes. I have recently stuck my Eddie AVS Thunder 4 barrel back onmy 440. I have an Eddie…