318 Poly Crank For 340
Tech Question
Craig Rocksvold, Waukon, IA, 1972 Plymouth Cuda 340
I have a 1972 340 engine with a cast crank and wondered ifa crank from a 318 Poly will bolt right in? I believe the Poly’s crank isforged, correct? I plan on building the engine like a ’71 or slightlybeyond. Behind the engine will be a 727 with a 3.23 Sure Grip. Your answerand advice would be appreciated.
Thanks.
Craig-
Depends on the year. As long as it’s from a ’62-up engine, yes, it will boltin. But many of these cranks have a bazillion miles on them, I suggesthaving it checked for invisible cracks (Magnaflux) beforehand.
I should also mention that for outputs in the stock or near-stock range, thecast crank is 100% OK.
Rick
Comments are closed.