|
|
Tech Question
AJ Haffly, McClure, PA, 1988 Plymouth Voyager 135
Yeah, I know it's not a hot rod or a hot rod wannabee, but I have a serious question. I bought this beasty with an automatic OD transaxle in it, but the original transaxle did not have OD. I can get the right steering column so I can tell I am in the right gear. But, How can I wire it up so I can utilize the OD function? I do know where the van is that the OD transaxle came out of and I was going to yank the steering column out of that one for mine. Should I grab more such as wiring haness or is there an easier solution? Thanks.
AJ-
There's quite a few things wrong here. Very much so!
First of all, as far as I know, there's never been an overdrive automatic made for the Trenton I-4 (i.e, 2.2 and 2.5L). The 4-speed was only available with the 3.0, 3.3, amd 3.8L V-6.
Then there's another factor that makes your question basically unanswerable: the overdrive tranny, the A-604, is totally different than the hydraulic A-413/670. The 604 (pronounced slip-oh-four) is 100% electronic, it's needs a special, dedicated computer to shift. Without this hooked up - a bazillion wires - it's a one-speed: second gear!
Any chance you are mistaking a lockup torque comverter version of the 3-speed 413/670 for an overdrive tranny?
Rick
| Next | Index | Previous |
|---|