|
|
Tech Question
brandon crowe, jesup, GA, 1971 plymouth barracuda 440
Will a late model alternator off a '95 Dakota work on my Barracuda (besides fabing brackets)? Can the stock voltage regulator work? Wiring? My stock alternator sucks: my lights blink at an idle, this is rather annoying. Would bypassing the stock ammeter help any?
Brandon, yes, the Denso alternators will work fine, as will the stock '71 regulator. But since the later alternators are all 90 amperes or more, bypassing the ammeter / bulkhead connector would be almost mandatory -- if you don't want a major-league meltdown -- or worse.
The existing field wiring can remain uunchaged (except for the swapping the terminal lugs from 1/4" blades to ring lugs), but the charging circuit wiring must increase in gauge (lower numerically). I'd say 10 gauge would be OK with a 90 ampere alternator, although #8 would be better.
Rick
| Next | Index | Previous |
|---|